Dongguan Chengfeng Testing Equipment Co., Ltd
Dongguan Chengfeng Testing Equipment Co., Ltd Establish credibility with sincerity and strive for excellence with sharpness！ 以诚立信，以锋致精！
Add to Cart
| EN 17092-1 Test Equipment Overview: | Impact abrasion resistance: Used to test the impact friction performance of protective clothing for motorcycle drivers. This test simulates the stress that is placed on the protective garments when worn by an average rider (with a body mass of 75kg and a height of 1.75m), when sliding from variable initial speeds to standstill on a real concrete road surface. All removable liners (for example, waterproof or thermal) are removed from the garment and the weakest combination(s) are tested. In one run, three specimens of the material(s) are mounted in holders in warp, weft and at 45 degrees. They are then attached to rotating arms positioned above a concrete tile. Once the desired speed has been reached, the specimens impact on the surface and come to a natural stop. If the specimens do not hole, the test is repeated a further two times. To pass, no holes with an opening of 5mm or more in any direction are to be present on the layer closest to the body. |
| Standard : | Testing apparatus for prEN 17092-1:2017. |
| EN 17092-1 Test Equipment Technical Parameters: | 1) Sample carrier number of samples: 3 2) Sample sliding diameter: 900mm 3) Drop height: (10±1)mm 4) Static pressure on sample: 18,75kPa 5) Weight of the sample carrier: 10,83kg |
| Fabric testing equipment series | EN 17092-1 Test Equipment |